Products Garage thresholds Garage seal SBD01
Steigner Garage seal SBD01

Garage seal SBD01

SBD01 garage seal is designed for the lower edge of the garage door up to 33 mm thick with an appropriate end profile in order to protect the gap between the gate and the floor. SBD01 is very flexible, therefore it easily adapts to the thickness of the door and the shape of it. Under the weight of the door, the seal adheres firmly to the floor. It perfectly harmonizes with a garage threshold, creating a barrier that cannot be penetrated by rainfall, insects and wind.

SBD01 garage seal has a rectangular fit. It is made from elastomer modified PVC plastic with a hardness of approx. 65 ° Sh’A. It is resistant to frost, heat, oil, scrubbing and cleaning with chemicals. It fits the gates of different manufacturers, so it can be used as a replacement for a used seal.

SBD properties

The SBD02 garage door seal is made of plastic modified with an elastomer. This makes it more flexible, stronger and weatherproof than elements made of ordinary PVC. The seal tolerates frost as well as heat, retaining its insulating properties and shape throughout the year.

Installation of a garage seal

Fasten the seal by simply sliding it into the guide at the bottom of the door. In case of a sliding problem, the guide or seal may be smeared with a thin layer of grease, oil or other slippery fluid.

Tip: garage seal protects the bottom opening between the door and the floor, but with above-average rainfall and flooding, water can enter through the side gaps. In order to fully secure the garage, it is also necessary to seal the door around the entire circumference.

Other products

Garage seal SBD03
Garage seal SBD03
Garage seal SBD02
Garage seal SBD02
Garage seal SBD01
Garage seal SBD01
Garage threshold SGD03
Garage threshold SGD03
Garage threshold SGD01
Garage threshold SGD01
Garage threshold SGD02
Garage threshold SGD02
© Steigner 2022