Products Shower seals Shower seal UK33-06 for glass thicknesses 5-6 mm
Steigner Shower seal UK33-06 for glass thicknesses 5-6 mm

Shower seal UK33-06 for glass thicknesses 5-6 mm

UK33-06 shower seal is designed for a rectangular and square shower enclosures with 5-6 mm thick glass. The rigid strip mounted on the glass is made of hard PVC; the two wings that cover up the gap are made of soft PVC. UK33-06 is resistant to mould and fungi, scrubbing, cleaning with chemical based cleaning agents. It is waterproof and leak proof. The shower seal does not age or crumble, and it can be used for many years. The maximum length of one segment is 200 cm.

Installation of UK33-06 shower seal is quick and easy – just put the profile on the glass and press it on firmly. If the strip does not want to snap on, place a little bit of dish-washing fluid onto the glass so it becomes slippery. If the seal moves after application to the glass, a small amount of transparent silicone can be applied to its edge to make it stick better to the glass.

This shower seal can be easily cut to the required length and shape. When cutting with the intent of shortening the seal, a handsaw may be used. To cut the soft wings, office scissors or a knife is enough. In order to connect two seals at a 90° angle, we recommend cutting the seal in a way that the wings overlap. We do not recommend using pliers for cutting shower seals as they might damage the product.

Tip: It is difficult to install PVC when it’s cold. Therefore, the shower seal should be applied at room temperature.

Advantages of Steigner shower seals

We care about the high quality of our products. That is why our shower seals are durable and effectively protect the bathroom from water leaks. At Steigner, we use the latest technologies, we look for new innovative solutions and constantly control the entire production process.

Long lasting protection

Shower seals  prevent water from leaking due to its construction and design. The hard sealing profile adheres to the walls of the cabin while the soft wing protects gaps from leaks. New on the market are magnetic shower seals that provide 100% protection while bathing.

Environmentally friendly production

In the production of Steigner shower seals we use a high strength PVC material. It is incredibly long-lasting. It can serve for many years. Seals are made of two types of PVC: a hard part (80 Sh’a D) and a soft part (70 Sh’a D).

Easy installation

The installation of the seal takes only few minutes and can be done at home without the help of a professional. Apply a hard PVC element to the glass and press firmly. And it’s ready! It is important to check the thickness of the glass before purchasing.

Different types of shower seals

Shower seals must be picked accordingly to the cabin parameters. We have several different profiles designed to fit all types of glass thicknesses and lengths. What’s more, different seals are used in rectangular cabins and others in round ones. Therefore, measuring the dimensions is very important before the seal is purchased.

We offer:

  • Large selection of shower seal profiles designed to fit any glass thicknesses and lengths
  • Curved shower seals for round showers
  • Magnetic shower seals

    Advantages of Steigner shower seals

    We care about the high quality of our products. That is why our shower seals are durable and effectively protect the bathroom from water leaks. At Steigner, we use the latest technologies, we look for new innovative solutions and constantly control the entire production process.

    Long lasting protection

    Shower seals  prevent water from leaking due to its construction and design. The hard sealing profile adheres to the walls of the cabin while the soft wing protects gaps from leaks. New on the market are magnetic shower seals that provide 100% protection while bathing.

    Environmentally friendly production

    In the production of Steigner shower seals we use a high strength PVC material. It is incredibly long-lasting. It can serve for many years. Seals are made of two types of PVC: a hard part (80 Sh’a D) and a soft part (70 Sh’a D).

    Easy installation

    The installation of the seal takes only few minutes and can be done at home without the help of a professional. Apply a hard PVC element to the glass and press firmly. And it’s ready! It is important to check the thickness of the glass before purchasing.

    Different types of shower seals

    Shower seals must be picked accordingly to the cabin parameters. We have several different profiles designed to fit all types of glass thicknesses and lengths. What’s more, different seals are used in rectangular cabins and others in round ones. Therefore, measuring the dimensions is very important before the seal is purchased.

    We offer:

    • Large selection of shower seal profiles designed to fit any glass thicknesses and lengths
    • Curved shower seals for round showers
    • Magnetic shower seals

Other products

Shower seal UK33-06 for glass thicknesses 5-6 mm
Shower seal UK33-06 for glass thicknesses 5-6 mm
Shower seal UK33-08 for glass thicknesses 7-8 mm
Shower seal UK33-08 for glass thicknesses 7-8 mm
Curved shower seal UK24-06 for glass thicknesses 5-6 mm
Curved shower seal UK24-06 for glass thicknesses 5-6 mm
Shower seal UK24-08 for glass thicknesses 7-8 mm
Shower seal UK24-08 for glass thicknesses 7-8 mm
Shower seal UK24-06 for glass thicknesses 5-6 mm
Shower seal UK24-06 for glass thicknesses 5-6 mm
Magnetic shower seal UKM02 for glass thicknesses 6-8 mm
Magnetic shower seal UKM02 for glass thicknesses 6-8 mm
Magnetic shower seal UKM03 for glass thicknesses 3.5-5 mm
Magnetic shower seal UKM03 for glass thicknesses 3.5-5 mm
Magnetic shower seal UKM04 for glass thicknesses 6-8 mm
Magnetic shower seal UKM04 for glass thicknesses 6-8 mm
Magnetic shower seal UKM05 for glass thicknesses 3.5-5 mm
Magnetic shower seal UKM05 for glass thicknesses 3.5-5 mm
Curved shower seal UK13 for glass thicknesses 3.5-5 mm
Curved shower seal UK13 for glass thicknesses 3.5-5 mm
Shower seal UK13 for glass thicknesses 3.5-5 mm
Shower seal UK13 for glass thicknesses 3.5-5 mm
Curved shower seal UK12 for glass thicknesses 6-8 mm
Curved shower seal UK12 for glass thicknesses 6-8 mm
Shower seal UK12 for glass thicknesses 6-8 mm
Shower seal UK12 for glass thicknesses 6-8 mm
Shower seal UK11 for glass thicknesses 6-8 mm
Shower seal UK11 for glass thicknesses 6-8 mm
Curved shower seal UK10 for glass thicknesses 6-8 mm
Curved shower seal UK10 for glass thicknesses 6-8 mm
Shower seal UK10 for glass thicknesses 6-8 mm
Shower seal UK10 for glass thicknesses 6-8 mm
Curved shower seal UK09 for glass thicknesses 6-8 mm
Curved shower seal UK09 for glass thicknesses 6-8 mm
Shower seal UK09 for glass thicknesses 6-8 mm
Shower seal UK09 for glass thicknesses 6-8 mm
Curved shower seal UK08 for glass thicknesses 6-8 mm
Curved shower seal UK08 for glass thicknesses 6-8 mm
Shower seal UK08 for glass thicknesses 6-8 mm
Shower seal UK08 for glass thicknesses 6-8 mm
Curved shower seal UK07 for glass thicknesses 6-8 mm
Curved shower seal UK07 for glass thicknesses 6-8 mm
Shower seal UK07 for glass thicknesses 6-8 mm
Shower seal UK07 for glass thicknesses 6-8 mm
Curved shower seal UK06 for glass thicknesses 3.5-5 mm
Curved shower seal UK06 for glass thicknesses 3.5-5 mm
Shower seal UK06 for glass thicknesses 3.5-5 mm
Shower seal UK06 for glass thicknesses 3.5-5 mm
Shower seal UK05 for glass thicknesses 6-8 mm
Shower seal UK05 for glass thicknesses 6-8 mm
Curved shower seal UK05 for glass thicknesses 6-8 mm
Curved shower seal UK05 for glass thicknesses 6-8 mm
Curved shower seal UK04 for glass thicknesses 3.5-5 mm
Curved shower seal UK04 for glass thicknesses 3.5-5 mm
Shower seal UK04 for glass thicknesses 3.5-5 mm
Shower seal UK04 for glass thicknesses 3.5-5 mm
Curved shower seal UK03 for glass thicknesses 6-8 mm
Curved shower seal UK03 for glass thicknesses 6-8 mm
Shower seal UK03 for glass thicknesses 6-8 mm
Shower seal UK03 for glass thicknesses 6-8 mm
Curved shower seal UK02 for glass thicknesses 6-8 mm
Curved shower seal UK02 for glass thicknesses 6-8 mm
Shower seal UK02 for glass thicknesses 6-8 mm
Shower seal UK02 for glass thicknesses 6-8 mm
Shower seal UK01 for glass thicknesses 3.5-5 mm
Shower seal UK01 for glass thicknesses 3.5-5 mm
Shower seal UK16 for glass thickness 5-6 mm
Shower seal UK16 for glass thickness 5-6 mm
Shower seal UK15 for glass thickness 6-8 mm
Shower seal UK15 for glass thickness 6-8 mm
Shower seal UK17 for glass thickness 6-8 mm
Shower seal UK17 for glass thickness 6-8 mm
Shower seal UK19 for glass thickness 5-6 mm
Shower seal UK19 for glass thickness 5-6 mm
Shower seal SDD01 white
Shower seal SDD01 white
Shower seal SDD01 transparent
Shower seal SDD01 transparent
Acrylic shower threshold SDD03 5 mm
Acrylic shower threshold SDD03 5 mm
Acrylic shower threshold SDD03 10 mm
Acrylic shower threshold SDD03 10 mm
Magnetic shower seal UKM01 for glass thickness 3.5-5 mm
Magnetic shower seal UKM01 for glass thickness 3.5-5 mm
Shower seal UK18 for glass thickness 3.5–5 mm
Shower seal UK18 for glass thickness 3.5–5 mm
Curved shower seal UK18 for glass thicknesses 3.5-5 mm
Curved shower seal UK18 for glass thicknesses 3.5-5 mm
Shower seal UK20-06 for glass thickness 6-7 mm
Shower seal UK20-06 for glass thickness 6-7 mm
Shower seal UK20-08 for glass thicknesses 8-9 mm
Shower seal UK20-08 for glass thicknesses 8-9 mm
Shower seal UK20-10 for glass thicknesses 10-11 mm
Shower seal UK20-10 for glass thicknesses 10-11 mm
Shower seal UK22-06 for glass thicknesses 5-6 mm
Shower seal UK22-06 for glass thicknesses 5-6 mm
Shower seal UK22-08 for glass thicknesses 7-8 mm
Shower seal UK22-08 for glass thicknesses 7-8 mm
Shower seal UK14 for glass thicknesses 6-8 mm
Shower seal UK14 for glass thicknesses 6-8 mm
© Steigner 2024